Air India’s Boeing 787-8 Dreamliner flight from London to Bengaluru which reported a fuel control switch glitch, took off on Sunday (February 1, 2026) after the crew carried out a physical check of the switch and found no abnormal parameters during start of the engine or thereafter, the Directorate General of Civil Aviation (DGCA) said on Tuesday (February 3, 2026).
The fuel control switch of the left engine of the Dreamliner aircraft VT-ANX, which operated the flight AI132 that had more than 200 people on board, did not latch on the ‘RUN’ position twice during the engine start at London Heathrow airport, but was properly locked in the ‘RUN’ position on the third attempt.
The detailed statement from the aviation regulator explaining the sequences related to the Dreamliner came against the backdrop of concerns in certain quarters over the aircraft operating the flight despite the fuel control switch issue.
Air India has started inspection of the fuel control switches of its Boeing 787 fleet following the incident, sources have said.
At present, Air India has 33 Boeing 787 aircraft.
Air India’s Senior Vice President for Flight Operations, Manish Uppal, has told Boeing 787 pilots that the airline has initiated a fleet-wide re-inspection of the aircraft’s fuel control switches and the airline’s engineering team has escalated the matter to Boeing for priority evaluation, according to sources.
“In the interim, while we await Boeing’s response, our engineers – out of an abundance of caution – have initiated precautionary fleet-wide re-inspection of the Fuel Control Switch (FCS) latch to verify normal operations,” he said in an email on Tuesday.
The DGCA, in its statement, also advised Air India to circulate the procedure recommended by Boeing for the operation of fuel ‘CUT OFF’ switch to its crew members.
Regarding flight AI132, the DGCA said that no abnormal engine parameters, cautions, warnings, or related system messages were observed during engine start or at any time thereafter.
“During engine start in London, on two occasions crew observed that the fuel control switch did not remain positively latched in the “RUN” position when light vertical pressure was applied. On the third attempt, the switch latched correctly in ‘RUN’ and subsequently remained stable. Before continuing with the rest of procedure, a physical verification was performed by the crew to confirm that the switch was fully and positively latched in the ‘RUN’ position,” the DGCA said in the statement.
“The operating crew member was briefed on the observation, unnecessary contact with the switch was avoided, and engine indications and alerting systems were closely monitored by the crew for the remainder of the flight. The flight was completed without incident,” the statement said.
‘RUN’ and ‘CUT OFF’ are used to start or shut down engines, respectively.
After the incident was reported, Air India’s engineering team made certain observations based on Boeing-recommended checks to establish the serviceability of fuel control switch.
Citing the team’s observations, DGCA said both the left and right switches were checked and found satisfactory, with the locking tooth/pawl fully seated and not slipping from ‘RUN’ to ‘CUT OFF’.
“When full force was applied parallel to the base plate, the switch remained secure. However, applying external force in an incorrect direction caused the switch to move easily from ‘RUN’ to ‘CUT OFF’, due to the angular base plate allowing slip when pressed improperly with finger or thumb,” DGCA said quoting the engineering team’s observations.
On the basis of Boeing’s communication, DGCA said the pull-to-unlock force was checked on the fuel control switch using the recommended procedure on the involved fuel cut off switch, the fuel control unit to be installed and fuel cut off switch of another aircraft.
“In all cases the pull-to-unlock force was found within limits. These inspections were carried out in the presence of DGCA officers,” the statement said.
An Air India pilot on Monday reported the defect with the fuel control switch after the aircraft landed in Bengaluru. The airline has grounded the plane for checks.
The functioning of the fuel control switch is in focus following the crash of Air India’s Boeing 787-8 aircraft in Ahmedabad that killed 260 people last June, as the preliminary probe report mentioned about fuel supply being cut off soon after take-off.
This came against the backdrop of a video, which the DGCA said has demonstrated the procedure for operating the fuel ‘CUT OFF’ switch was incorrect.
An Air India pilot has reported an instance of a fuel switch malfunction on a Boeing 787-8 aircraft that operated a flight from London to Bengaluru, landing on February 2, 2026.
An Air India pilot has reported an instance of a fuel switch malfunction on a Boeing 787-8 aircraft that operated a flight from London to Bengaluru, landing on February 2, 2026.
| Video Credit:
The Hindu
Published – February 04, 2026 12:20 am IST
